![]() |
|
|
|
#2
|
||||
|
||||
Over Flow Hose
# 021 997 76 82
This one does not have the braided cloth covering. The only real Abrasion Stress Point is where the hose passes through the Engine Compartment Metal Sidewall @ just right behind the Passenger Hood Hinge. I'd put a Rubber grommet in the opening ,if you're concerned,and run the hose through the grommet. Normal Retail (That's Not a Stealership) appears to be about $5.50 per meter. Any coolant rated hose with the correct I.D and O.D. will suffice. You do realize the Over Flow Hose routes to the Over Flow Tank located inside the Passenger side Fender-well?(Accessible by removing the "Plastico" inner fender liner.)
__________________
'84 300SD sold 124.128 |
Bookmarks |
|
|