Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help




Go Back   PeachParts Mercedes ShopForum > Technical Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 12-21-2001, 10:28 PM
TurboTurbine
Guest
 
Posts: n/a
electrical problem

i just installed a new radio in my 84 300d. i used the 3 of the 4 wires from the old radio. the red one is always hot the black one which is hot only when the ignition is on and the grey one is ground, there was a brown wire to light up the radio lights but i just left that one empty(insulated). i think all my wiring is OK but the #2 fuse that controls the buzzer and all the panel and switch lights keeps blowing out, incidentally that brown wire i mentioned above is controled by that fuse as well. i rechecked all my wiring but all is in order. can any one help me.
thanks
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
1992 500SL ASR Problem jrodnar SL Forum 10 12-22-2008 12:18 PM
ML electrical problem cerbomark Tech Help 4 12-13-2004 11:27 AM
electrical problem: hazard relay jab Tech Help 3 06-02-2003 04:31 PM
broken hood release and electrical problem 1stimer Diesel Discussion 2 03-27-2003 11:49 AM
Another electrical problem. '01 C240. Anyone heard of this? Brian K Tech Help 13 11-24-2001 05:34 PM



All times are GMT -4. The time now is 07:10 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2011 Pelican Parts - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page