![]() |
|
|
|
#7
|
|||
|
|||
VERY common failure for this band to break, it is welded & that causes stress. Most never have a problem!
TOO much clearance on the B-2 piston will cause premature failure. Check out BENZMAC's first entry on this problem as I'm sure he has seen many with broken bands & band pistons as well
__________________
MERCEDES Benz Master Guild Technician (6 TIMES) ASE Master Technician Mercedes Benz Star Technician (2 times) 44 years foreign automotive repair 27 Years M.B. Shop foreman (dealer) MB technical information Specialist (15 years) 190E 2.3 16V ITS SCCA race car (sold) 1986 190E 2.3 16V 2.5 (sold) Retired Moderator |
Bookmarks |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Car wont go into forward gear/ only reverse help!! | BB | Tech Help | 23 | 08-15-2016 11:47 PM |
1986 300E power seat won't move forward and tilt up & forward | jrmd01 | Tech Help | 21 | 03-24-2012 06:11 PM |
Pointy gears on a 1988 420 sel? | Blu 420Sel | Tech Help | 12 | 04-23-2003 11:34 PM |
can you buy JUST the gears for an odometer? | RG5384 | Diesel Discussion | 13 | 02-28-2002 03:00 AM |
no forward gears in 81300SD auto. B2, pump or ? | maximumbob | Tech Help | 1 | 04-30-2001 07:32 PM |