Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help




Go Back   PeachParts Mercedes ShopForum > Technical Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 02-17-2002, 09:19 PM
A. Rosich's Avatar
Registered User
 
Join Date: Nov 1999
Location: San Jose, Costa Rica
Posts: 883
Power window refuses to stop

The driver's door power window on my 1995 E320T makes an awful noise when it fully closes and you do not let go of the switch. This happens also when closing all the windows with the comfort feature.

The motor keeps moving and a loud continuous tack sound is heard from the mechanism inside the door.

There is no problem when the window is opened.

What could be causing the problem and how may I fix it?

Thank you in advance for the input.

A. Rosich
S320, 1998
E320T, 1995
Reply With Quote
  #2  
Old 02-17-2002, 10:56 PM
unkl300d's Avatar
Registered User
 
Join Date: Jul 1999
Location: San Francisco, Ca
Posts: 2,267
windex

My w126 300SE recently had a similar problem.
Do a search on the archives.

My indow regulator had to be replaced. Some of the teeth were shot. The sheetmetal frame onto which the regualtor is bolted bends a bit outward when the window is closed too tight.
This can cause a tearin that area. That can be expensive.
Open up the door panel and inspect .
For the time being, just roll up the affected windows slightly snug then tap it in until no wind noise is heard.
No need to jam it all the way up, sp. with an automatic
system.

Simple cause may be dirty-sticky window guides.

Don't let it go!!
good luck

__________________
1979 300D 199 K miles
1995 C280 95 K miles
1992 Cadillac Eldorado Touring Coupe 57K miles
********************
1979 240D 140Kmiles (bought for parents) *SOLD.
SAN FRANCISCO/(*San Diego)
1989 300SE 148 K miles *SOLD
Reply With Quote
  #3  
Old 02-18-2002, 06:56 PM
A. Rosich's Avatar
Registered User
 
Join Date: Nov 1999
Location: San Jose, Costa Rica
Posts: 883
Thank you very much for your answer.

It sounds like the frame is bent as you mention. I'll inspect the guides this weekend and find out.

A. Rosich

S320, 1998
E320T, 1995
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
power window probs with 109 kaiser Vintage Mercedes 7 09-21-2004 05:01 AM
W201 power window won't go up 73MB280SEL Tech Help 8 08-24-2003 11:00 PM
ML320 power window problem johng_22 ML, GL, G-Wagen, R-Class, Unimog, Sprinter 4 08-13-2003 06:57 PM
Dead power window - 300e jkmmrs Tech Help 3 07-03-2003 11:00 PM
Power window stopped now working larrysiny Tech Help 3 08-13-2002 05:02 PM



All times are GMT -4. The time now is 10:24 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2011 Pelican Parts - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page