Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help

Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

LinkBack Thread Tools Display Modes
Old 09-28-2012, 11:41 PM
Registered User
Join Date: Dec 2010
Posts: 24
replacing bumper molding

I will be replacing the damaged front bumper molding from my 1990 300e with one from a 1993 300e. I have read all instructions from the FSM, and visually scouted out the job. I am wondering how to remove the 14 "clips". The FSM lists a special tool,but certainly there is another way,right? Any tips or advice you have on doing this job will be greatly appreciated.


Reply With Quote
Old 09-29-2012, 01:37 PM
Registered User
Join Date: Dec 2007
Location: NorCal
Posts: 1,332
No special tool needed. Just have to be careful with a screwdriver to pop the clips loose.

1991 300E - 212K and rising fast...
Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On

All times are GMT -4. The time now is 01:29 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2018 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page