|
|
|
#1
|
|||
|
|||
replacing bumper molding
I will be replacing the damaged front bumper molding from my 1990 300e with one from a 1993 300e. I have read all instructions from the FSM, and visually scouted out the job. I am wondering how to remove the 14 "clips". The FSM lists a special tool,but certainly there is another way,right? Any tips or advice you have on doing this job will be greatly appreciated.
Thanks, donno |
#2
|
|||
|
|||
No special tool needed. Just have to be careful with a screwdriver to pop the clips loose.
__________________
http://i193.photobucket.com/albums/z...-RESIZED-1.jpg 1991 300E - 212K and rising fast... |
Bookmarks |
|
|