|
|
|
|
|
|
#1
|
|||
|
|||
|
Just a few days ago i was picking my brother up and when i got there something told me to look at my heat gauge it was at 120c
...At that second i screamed ----------....So i went to check and sure enough my upper hose had fallin off, green goo every where, what a mess...So i let it cool fixed to hose and filled my resovior with water and went back home. I ordered a new hose from carquest. 2days later i get it install it, it worked for a day then to my suprise again it blew off...Now i decided to buy some new metal hose fasteners, it's been working so far (onlys been 2days)...If this dosn't fix the problem what do u guys suggest. All this just to save $60 on installation..Thanks in advance
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| DIY page. Introduction to Upper Control Arm Rebuild | BoostnBenz | Diesel Discussion | 0 | 02-16-2004 01:05 AM |
| 240D Glow Plugs Burned & Injectors Leaking | sgoodhart | Diesel Discussion | 15 | 05-01-2003 01:42 PM |
| 1995 E-300 Diesel Leaking Part | Byte007 | Tech Help | 2 | 01-30-2003 12:29 PM |
| Wait before you replace upper control arm bushings | MVK | Diesel Discussion | 0 | 07-09-2002 08:21 PM |
| leaking fuel injector | layjay | Tech Help | 0 | 01-28-2002 10:15 PM |