240D tech specs

I am installing a 79 4 cyc.diesel and automatic tranny out of a 240D in my 57 willys offroad vehicle and it doesn't have an owners manual with it .I need to know how much oil it holds and tranny fluid also any other vital specs that I may need.Thank you for your help.
Uncle Willy

Thanks TXBill.It has 2 vacuum diaphrams on the injection pump only one of these was hooked up but when I took the ignition out of it there are 2 vaccum hose one was hooked to the back of the injection pump and the other was open I need to know if anyone could e mail me a vaccum diagram for it .It is a 79 240D with a 4 cyc. diesel.

[stevebfl]

The only vacuum to a 79 240D injection pump would be for the shut-off diaphram. Not much needed in the way of a diagram. Just hook vacuum to the diaphram any time you wish the motor not to run. All of the rest of the time there is no need for vacuum at the pump.

Thanks for the info but what is the second diaphram on the top of the injection pump?

Uncle,

What are you doing about a transfer case in this swap?

Sounds like a fun project.

Good luck,

I am using 2 divorced Transfer cases from a chevy truck using a small driveshaft to the left T-case from the transmission,And using front output of the left case to power the right case via industrial chain.They will be mounted right next to each other (giving me twice the lowrange gearing somewhere around 6 to 1)then I will run driveshafts to the axles.I just put the engine in and will be frabricating mounts for it soon.

If anyone is interested you can see my jeep in action at www.beatniktimes.com Just look under Uncle Willy