thanks Jab... Sorry my details are not more clear and precise. I find you just have to play with the foxwell and try stuff..the compressor actuation will fill struts and then they go down again but there is a special functions menu with f3 and f4 options for fill and release. One raises and the other lowers. It will raise to a certain height, plus two I believe..and thats it. This is about an inch clearance over the rear wheel. Nice firm ride at this height. It will raise much more to plus 8mm and maybe more but then when you turn the car off and close the doors it will drop again to a preset level. It also gives both manual and automatic options to adjust ride height (raise rear and lower rear) and the instructions really dont make sense but they work. something stated about using the inclinometer and being within preset values...

Now in my wagon I notice the passenger rear is lower I suspect due to the huge 100 amp hour battery by the right wheel. I wish I could level the car because it sits lower on that side and it does give a left and right fill strut option but this seems only temporary. And I cant tell its really filling just the left or right. In my car they both seem to be connected to the same reservoir and fill with equal inflation pressure.

Let us know how it works!