Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

 
 
LinkBack Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #6  
Old 08-08-2002, 06:39 AM
engatwork's Avatar
Registered User
 
Join Date: May 2000
Location: Soperton, Ga. USA
Posts: 14,413
For reference in the future I would suggest, on a good running car, to disconnect a vacuum line at idle and watch how the car runs/idles. Try disconnecting a small one and a large one. Disconnecting a large one will make the engine run REAL rough whereas the small ones are not quite as bad but do show up. Also, if you want to get real adventursome disconnect the MAS meter and watch the idle.

I recently resolved a very, very slight "miss" at idle on my E320 and found that I had the plugs gapped too close together.
__________________
Jim

Last edited by engatwork; 08-08-2002 at 12:15 PM.
Reply With Quote
 

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 08:53 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page