Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help

Go Back   PeachParts Mercedes ShopForum > Technical Information and Support > Tech Help

Closed Thread
LinkBack Thread Tools Display Modes
Old 06-19-1999, 04:34 PM
Ralph Burnette
Posts: n/a
I replaced all four shocks on my w140 (93
300SD. The fronts are pretty straightforward. However, for the rear
shocks, you need to remove the panels in
the trunk to get to the upper mount points.
The rear seat is too far forward.

In addition, there is a plastic shroud on
the a lower struct, where each rear shock
mounts. This needs to be removed (4 bolts)
prior to changing the shock.

Ralph Burnette
1993 300SD
Closed Thread


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
W140 lower bushing replacement HPF Tech Help 22 09-02-2009 08:51 AM
W140 S500 Oxygen Sensor Replacement KenP Tech Help 1 05-04-2003 08:51 AM
Oxygen sensor replacement on w140 S500 Arthur2k Tech Help 8 04-16-2003 06:27 PM
Replacement of Tailgate Shock on 1984 300TD Echo Site Feedback 1 02-02-2003 03:57 PM
1985 300SD- Rear Shock Replacement JHK Diesel Discussion 3 01-21-2001 06:48 PM

All times are GMT -4. The time now is 03:35 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2018 Pelican Parts LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page