Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 12-14-2002, 01:51 PM
quickstan
Guest
 
Posts: n/a
Question still no ignition

1992 500sl What pin in test connector at EZL will be hot with key in run position? Is there a way to test the crankshaft p[osition sensor?

Reply With Quote
  #2  
Old 01-03-2006, 08:45 PM
Registered User
 
Join Date: Aug 2004
Posts: 21
Crank sensor

Hi the crank sensor can be tested w/ohm test but the best way, that will also test pins on flywheel is w/waveform viewer. With a waveform viewer you unplug sensor and hook straight to it. I use a Snap-on Vantage. Some Digital Ohm meters will work. Hope this helps I'm working on a no spark problem w/91 500 right now that's giving me fits because every signal is there at the ignition module, but I cannot get codes from the ECU so I do notthink these two are talking to each other, Well good luck

Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 05:56 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2022, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2018 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page