Valve Adjustment

		PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help
Valve Adjustment

10-04-1999, 02:26 PM

Cisco

Registered User

Join Date: May 1999

Location: Queens, New York, USA

Posts: 38

I need to adjust the valves on my 1983 300SD Trubo Diesel. My friend and I removed the valves cover and measured the current calibration. What we found was that all the valves were adjusted at approximately .010mm. I did not recalibrated the valves because we could not determine which valves were the intake and which were the exhaust. If I stand in front of the engine (from the timming chain) can someone tell me wich is the intake valve and wich is the exhaust. I appreciate any advise. Thanks

------------------

Bookmarks

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is On Trackbacks are On Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Valve stem seal RR	David.kingsbury	Tech Help	3	08-06-2002 08:42 PM
M117.963 Valve Lash Adjustment	moolewman	Tech Help	0	07-25-2002 01:09 AM
unsteady valve clearances	jerryrigged	Diesel Discussion	5	01-24-2002 10:55 PM
Valve Stem Replacement - Question??	Corby	Diesel Discussion	15	11-03-2001 06:24 PM
M103 Valve guides	edbardzik	Tech Help	3	06-01-2000 08:37 AM

All times are GMT -4. The time now is 03:16 AM.