Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help




Go Back   PeachParts Mercedes ShopForum > Technical Information and Support > Tech Help

Closed Thread
 
LinkBack Thread Tools Display Modes
  #1  
Old 10-15-1999, 03:28 PM
moraine
Guest
 
Posts: n/a
I continue to have problems with interior wooden trim pieces pulling away from various spots on the dashboard/glovebox. Does anyone have recommendations for an adhesive product they've used for this purpose whose performance they've been satisfied with? I'd appreciate any help with this. Thanks-

Terry
  #2  
Old 10-15-1999, 04:20 PM
Adamou
Guest
 
Posts: n/a
I used for my old 500sel the two side adhesive (used to stick the carpet on the floor) it works well but you need a very clean and plane surface. Otherwise I used hot glue (Black&Decker glue gun), the best solution...

------------------
-------------------------------------
WEB Site : http://www.adamou.dpn.ch
A.S.C. 1999
-------------------------------------


  #3  
Old 10-15-1999, 05:07 PM
moraine
Guest
 
Posts: n/a
Hadn't thought of a glue gun - thanks.
  #4  
Old 10-16-1999, 01:40 AM
hkkle
Guest
 
Posts: n/a
On my 82 300DT glove box trim, I used quick drying two parts epoxy glue. You don't have to take out the old glue. Hold the trim until glue is set, then masking tape it for 24 hours. It works for me.
  #5  
Old 10-16-1999, 02:00 AM
Robert W. Roe's Avatar
Registered User
 
Join Date: May 1999
Location: Lehigh Valley PA
Posts: 1,322
I like the 3M products. I've used their trim adhesive with some success. I like to clean the aluminum surfaces first with 3M adhesive remover. 3M also makes a blue masking tape, available in most building supply or paint stores, that is guaranteed not to leave adhesive behind for a full week. Also I use Meguiar's #7 and #26 to polish any wood that has to come out of the car.

------------------
Robert W. Roe
1984 300SD 166,001 miles
  #6  
Old 10-17-1999, 04:20 PM
moraine
Guest
 
Posts: n/a
Good info. Thanks for the advice-
Closed Thread

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Interior Trim - Model 124 Rear Pillar git0 Tech Help 1 02-19-2005 12:12 PM
Adhesive for trim DCM Diesel Discussion 3 11-27-2003 06:56 PM
adhesive recommendations Douglas Broome Tech Help 6 11-18-2001 06:36 PM
adhesive recommendations Douglas Broome Vintage Mercedes 8 11-18-2001 06:24 PM
Lexol's Vinylex on Dash Wooden Trim kit?? AMGCKlass Detailing and Interior 0 11-07-2000 08:13 AM



All times are GMT -4. The time now is 12:32 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2011 Pelican Parts - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page