Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 03-25-2003, 12:10 AM
Registered User
 
Join Date: Mar 2003
Location: canada
Posts: 18
96 benz c280

I want to remove the instruments cluster to replace the light bulb
however I don't see any screw, is there a trick way to replace?

__________________
jsa
Reply With Quote
  #2  
Old 03-25-2003, 12:15 AM
blackmercedes's Avatar
Just a guy
 
Join Date: Dec 2000
Location: St. Albert, Alberta, Canada
Posts: 3,492
The cluster pulls out. Your dealer has some specialty tools that make the job pretty easy. You slide in them in at the top on each side, and YANK.

Be careful not to break the cluster, as it's $$$$$$$.

Replace ALL the bulbs so that you're not doing it again soon.

BTE, is you find the job daunting, most dealers charge an hours labour in case you're curious.
__________________
John Shellenberg
1998 C230 "Black Betty" 240K

http://img31.exs.cx/img31/4050/tophat6.gif
Reply With Quote
  #3  
Old 03-25-2003, 11:47 PM
Registered User
 
Join Date: Mar 2003
Location: canada
Posts: 18
thanks you very much...
and I have one more question.
if I don't have any special tools. what will make the job easily?
__________________
jsa
Reply With Quote
  #4  
Old 03-26-2003, 06:15 AM
Registered User
 
Join Date: Jan 2002
Location: England
Posts: 1,841
Coat hangers can be used.

Do a search on this site, someone posetd pictures of how to make something and how to use it to remove the cluster

good luck
__________________
190E's:
2.5-16v 1990 90,000m Astral Silver
2.0E 8v 1986 107,000m Black 2nd owner
http://www.maylane.demon.co.uk/190esmall.jpghttp://www.maylane.demon.co.uk/190esmall2.jpg
Reply With Quote
  #5  
Old 03-31-2003, 10:53 PM
JAndersson
Guest
 
Posts: n/a
Replace Instrument Cluster

Hi,

I have a 1994 C280 and I took it in to have the bulbs replaced. They told me that they had to remove the steering wheel in order to drop the instrument cluster out.

Hope that's helpful.

JAndersson
Reply With Quote
  #6  
Old 04-01-2003, 08:46 AM
Registered User
 
Join Date: Oct 2002
Location: New England
Posts: 68
I have a 95 C280 and recently replaced my temp bulb in my cluster. It was fairly easy, and I did not pull off my steering wheel or have any specailty tools. I pulled the tweeter cover to the left of the console and then pulled the tweeter off to the side. Next, pulled off the heater duct cover(under the tweeter)-it comes out with two screws then by depressing two small clips in the bottom of the heater duct cover. I then had enough room to fit my hand behind the cluster and carefully push it out. I did however, cut a small bit of coat hanger, fashioned a small loop on one end(to fit over my thumb) and the other end I bent over in a small catch, to aid me. Once I got it pulled loose, unclipped the two connections on the back, I was able to(at the correct angle) pull the cluster free.

hope that helps,

-M
Reply With Quote
  #7  
Old 04-07-2003, 12:41 AM
Registered User
 
Join Date: Mar 2003
Location: canada
Posts: 18
thanks for your suggestion.
I will try it.
__________________
jsa
Reply With Quote
  #8  
Old 04-07-2003, 12:46 AM
Registered User
 
Join Date: Mar 2003
Location: canada
Posts: 18
c 280 water pump

did any one replace the waterpump on the c 280 before?
do i have to replace the radiator? where is the belt tensioner?
and how do i remove the fan ?
i have lack of experience on benz however my parents just brought the car, therefore I have to fix it myself.

thank you
__________________
jsa
Reply With Quote
  #9  
Old 04-07-2003, 07:22 AM
Registered User
 
Join Date: Oct 2002
Location: New England
Posts: 68
Do a search on this forum, I think you will find someone that has done one.

-M
Reply With Quote
  #10  
Old 04-07-2003, 11:48 PM
Registered User
 
Join Date: Mar 2003
Location: canada
Posts: 18
I search it for long time
however there is nothing metion how to replace the waterpumps

__________________
jsa
Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 04:53 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page