5 years and 9 days. That just may be a new record.

__________________
1987 300TD 309, xxx 2.8.2014 10,000 mile OCI


Be careful of the toes you step on today, as they may be connected to the ass you have to kiss tomorrow. anonymous

“Be who you are and say what you feel, because those who mind don’t matter, and those who matter won’t mind.” Dr. Seuss

Should I have pi$$ed off the forum police by starting a new thread before searching?

__________________
1987 300SDL "Rudolf" 239k 8/10


Gone but not forgotten
-1980 F250 4X4 351C Snowplow "The Beast"
-1976 Caddy Eldo Convertible, in triple red. "Red headed Slut"
-2002 Honda Accord EX-V6 loaded 107k, My first brand new car!


*IM A HORRIBLE SPELLER*

Well I am definitely a dummy when it comes to putting these lights in .I have had them for more than 3 years with all the bulbs and new lock caps and a peice to stick into the washer bottle to keep it for leaking.

I want to take the wipers off and put the 260-E plane panels below. I could certainly use you help PM at krwaxb@yahoo.com I will give you my phone number. at your convenience so I can try this over the phone I will except a collect call.

Sincerely
Bob Geco

I emailed importvision.com regarding installing in my 190E, I was told that their euro sets including corner lights ($205) are virtually plug and play-no need for anything else. Also, on Ebay there are Bi- xenon complete with corner lights for $389. They too require no other electrical plug, pins, whatever. Just plug and play. Can this really be true? anybody know?

the depos i used were pretty much plug n play. i did however use the original corner socket in the new corners, it was a tight fit to get it to twist it but it made it. my dot setup had a 3 prong corner bulb sockets, the depo ones were a 2 prong n didnt plug in.

back to my question, anyone know if i buy euro washer brackets if it will fit the bottom of the lights housing to fasten them, i was able to modfify the dot washer brackets on the drivers side but not the passenger side whick jumps a bit from the enging vibrations?

__________________
1987 300SDL "Rudolf" 239k 8/10


Gone but not forgotten
-1980 F250 4X4 351C Snowplow "The Beast"
-1976 Caddy Eldo Convertible, in triple red. "Red headed Slut"
-2002 Honda Accord EX-V6 loaded 107k, My first brand new car!


*IM A HORRIBLE SPELLER*

i'm glad someone bumped this thread b/c it just helped me figure out the wiring on my euros.

__________________
83 300SD 226k virgin.

05 chevy duramax :bowdown:
air suspension + 500hp = fun for everyone

01 silverado 2wd 1500 5.9 cummins