|
|
|
|
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Anyone knows how to remove the "Heating water feed line w/ fuel heat exchanger" on a 603 engine. Mine has a pinhole size in which water escapes so I can't use the car.
Is there a special too to remove the size 32 nut bolted to the block where the LINE is attached to? or do I have to take out the intake manifold to remove this. The part number of the LINE is 603 200 02 52. This is what I want to remove so I can have the leak welded. Thanks! Francis |
#2
|
|||
|
|||
The line should pull out when the clip is taken out. The nut doesn't have to I think. There is usually an o-ring behind there.
------------------ Benzmac: 1981 280GE SWB 1987 16V ASE CERTIFIED MASTER AUTO TECHNICIAN SERVICE MANAGER FOR 14 BAY FACILITY MERCEDES SPECIALIST 8 YRS PARTNER IN MERCEDESSHOP.COM |
#3
|
|||
|
|||
Hey thanks there! That would definitely make my life easier! I'll try to give it a puill later. Hope it comes off. Francis |
#4
|
|||
|
|||
Worked! Thanks for the great tip!
Can I put grease on the O-ring when I put it back on? Francis |
#5
|
|||
|
|||
Yes, a little will do fine.
------------------ Benzmac: 1981 280GE SWB 1987 16V ASE CERTIFIED MASTER AUTO TECHNICIAN SERVICE MANAGER FOR 14 BAY FACILITY MERCEDES SPECIALIST 8 YRS PARTNER IN MERCEDESSHOP.COM |
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
94 E320 Water Pump replace method | 320wheels | Tech Help | 11 | 07-01-2013 02:35 AM |
Help! Engine Dead???? | Breckman99 | Diesel Discussion | 17 | 05-09-2005 11:26 PM |
82 300D cooling problems | DIESEL | Diesel Discussion | 6 | 05-03-2002 12:47 AM |
82 300TD A/C problem | benchracer | Diesel Discussion | 15 | 06-16-2001 08:50 PM |
Safe to plug "heating water feed line" of 603? | francis | Tech Help | 0 | 08-18-2000 03:36 PM |