Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 07-29-2003, 02:06 PM
Registered User
 
Join Date: Jul 2003
Location: Laguna, CA
Posts: 16
*update* to rapid brake pad wear in '03 E320 (10k miles) need help dealing w/ dealer

After taking the advice of the techs here, I did not bother to service the brakes on the car. It was taken the dealer. Just got a phone call from the dealer and it appears the rear pads are worn and causing the indicator lamp to turn on. The car was NOT driven with the parking brake on. That would be my first indication of rapid rear brake pad wear. However, the service advisor explained it that "the car was driven hard, and if the brake system detects rapid acceleration, it will apply the rear brakes."

I don't buy this excuse and I'm certainly not accelerating or driving the car hard. This is not my race car nor spirited weekend car. I already have an S2000 for that.

So what do I do? Eat the cost of the rear brake pad service and wait for it to happen again? I like to say I don't have the experience or knowledge to be called a mechanic but I'm no fool when it comes to the mechanics of a car.

TIA
-ardy

Reply With Quote
  #2  
Old 07-30-2003, 04:02 AM
Registered User
 
Join Date: Jul 2003
Location: Laguna, CA
Posts: 16
Reply With Quote
  #3  
Old 07-30-2003, 04:22 AM
Registered User
 
Join Date: Apr 2002
Posts: 3,473
I am not sure if your car has ASR or whatever they might call it where it brakes the driveline.

But I do know that my little brother changes his brake pads every 10k miles in the front, but not the back. I think usually you go through two to three sets of front pads to one set of rear pads.

I havent had a car with ASR so I dont know. Ask one of the 500E guys. Doing brake pads is easy, you can do it yourself.

Also, the parking brake has parking break shoes inside the rotor disc, the brake pads are a separate system working on the same disc. If you took the wheel off youd know what I am talking about.
__________________
Current Stable:
1994 S500 v140, 210k miles, white with grey.

Former Mercedes in the Stable:
1983 300CD Turbo diesel 515k mi sold (rumor has it, that it has 750k miles on it now)
1984 300CD Turbo Diesel 150 k mi sold
1982 300D Turbo Diesel 225 sold
1987 300D Turbo Diesel 255k mi sold
1988 300 CE AMG Hammer 15k mi sold
1986 "300E" Amg Hammer 88k mi sold (it was really a 200, not even an E (124.020)
1992 500E 156k mi sold
etc.
Reply With Quote
  #4  
Old 07-30-2003, 07:25 PM
Moderator
 
Join Date: Mar 2000
Location: Gainesville FL
Posts: 6,844
The amber triangle flashes on earlier models when traction control is activated. It is usually accompanied by a chunking in the rear wheels as the offending wheels brakes are applied.
__________________
Steve Brotherton
Continental Imports
Gainesville FL
Bosch Master, ASE Master, L1
33 years MB technician
Reply With Quote
  #5  
Old 07-30-2003, 07:36 PM
Registered User
 
Join Date: Jul 2003
Location: Laguna, CA
Posts: 16
Quote:
Originally posted by mespe
I think the tech was on the right foot, but started off in the wrong direction, Does anyone know if the ABS light turns on when ABS detects that a tire is spinning (traction control) ? I believe that If one tire rotates faster than the other, the faster rotating tire will have the brake applied to it to slow it down so as to prvent fish tailing.

My guess would be that the traction control is defective and applying the brakes too often. This could be confirmed by reduced MPG. What kind of mileage do you get. Another thing that could cause this is riding the brake. Do you drive with a foot on the brake pedal?

Good luck

Marty
I need to keep an eye on the average mgh but so far it hasn't been abnormal. Something abnormal is the amount of dust and the grooves (lip at edge of each rotor) in all four rotors after 10,000 miles. The car was never driven hard, the tires are proof to that, they are wearing evenly and the shoulders aren't scrubbed. Foot wasn't on brake while driving. I can only deduce that the system is not performing properly and there's no way I can prove it.

-ardy
Reply With Quote
  #6  
Old 07-30-2003, 09:29 PM
Registered User
 
Join Date: Jul 2003
Location: Laguna, CA
Posts: 16
Quote:
Originally posted by mespe
The amber triangle flashes When the system is working properly. A faulty system may, OR MAY NOT flash the amber triangle. Easiest way to test the amber flashing is to turf someones lawn. I have a couple addresses that you can test this out on (just kidding) maybe try it when the road is wet. but grass would be easier on the car - harder on the cleaning.

Marty
very good idea, I guess I'll go do some donuts in a field? lol...
Reply With Quote
  #7  
Old 07-30-2003, 09:55 PM
DR.DIESEL's Avatar
Senior Member
 
Join Date: Mar 2003
Location: Puget Sound, Washington St.
Posts: 522
The only explanation for the (REAR) pads being worn down are
either a SBC malfunction which may be hard to prove or diagnose
or the ASR function of ESP is kicking in, constantly trying to stop
spining rear wheels. Which is super hard on the pads.
I have seen lots of cars with higher HP or 4-matic in our area
that eat up rear pads during the rainy season in record time.
I had a client with a ML55 that used it for skiing. He did a bunch of snow and ice driving and the ETS was constantly trying to stop those rear wheels from slipping, needless to say we replaced the
rear pads at only 5500 miles.
His rear wheels were much darker from all the dust.
Being that your car has less than 12,000 miles and needs rear pads, If it were on my rack I would attack it as a malfunctioning
SBC system.
If you did drive like a maniac, your front pads would be toast long before the rears.
Driving with the parking brake on would just smoke the parking brake shoes, not the pads.
I would suggest you make NOISE to your MB Center about this issue and request this be fixed as well as replacing the rear brakes no charge.
Good luck
DR.D
Reply With Quote
  #8  
Old 07-31-2003, 07:47 PM
Gilly's Avatar
Registered User
 
Join Date: Mar 2001
Location: Evansville WI
Posts: 9,616
I would assume Dr D would back me up on this:
Wear items under the new car warranty, such as brakes, wipers, bulbs, etc usually have a 12 month/12,000 mile special warranty coverage. It should take care of the brake pads if you are within those limits, and the dealer isn't claiming "vehicle abuse", (and if they are, I'd ask how they are coming to that conclusion). Your word against theirs, and you say the tires look good. You should be covered, but you really need an answer to why this happened to begin with. They are NOT obligated to replace them again in 10,000, just ONCE.

Gilly
Reply With Quote
  #9  
Old 07-31-2003, 08:59 PM
Moderator
 
Join Date: Jul 2001
Location: Woolwich, Maine
Posts: 3,598
Gilly and DR.DIESEL,

Don't these cars have a system to "dry" the pads and rotors by applying the brakes lightly when they detect wetness? I am not sure how this system works, or if it can work with only the rear pads, but if it is malfunctioning, I guess nearly anything is possible. In any case, I would think the car's performance would be suffering if you were driving around with the brakes lightly applied all the time.

vapors2k,

If you put the car in neutral and let it coast after getting up some speed, does the car coast or does it slow down a little faster than you would expect?

I agree you need to find out what the problem is, and I do not think it is confined to needing new pads. Good luck, Jim
__________________
Own:
1986 Euro 190E 2.3-16 (291,000 miles),
1998 E300D TurboDiesel, 231,000 miles -purchased with 45,000,
1988 300E 5-speed 252,000 miles,
1983 240D 4-speed, purchased w/136,000, now with 222,000 miles.
2009 ML320CDI Bluetec, 89,000 miles

Owned:
1971 220D (250,000 miles plus, sold to father-in-law),
1975 240D (245,000 miles - died of body rot),
1991 350SD (176,560 miles, weakest Benz I have owned),
1999 C230 Sport (45,400 miles),
1982 240D (321,000 miles, put to sleep)
Reply With Quote
  #10  
Old 07-31-2003, 09:15 PM
Gilly's Avatar
Registered User
 
Join Date: Mar 2001
Location: Evansville WI
Posts: 9,616
The operation of (I believe it's called) Dry Stop is dependent on the operation of the wipers. It's not constant, it operates the brakes vry slightly and I believe the interval is every 20(?) minutes? I could look it up. It's a very very slight application, and is all 4 wheels.

Gilly
Reply With Quote
  #11  
Old 07-31-2003, 09:26 PM
Registered User
 
Join Date: Jan 2003
Location: Sydney, Australia
Posts: 627
I think I had better look after the cars I have now as I'm not sure that I would ever want to update to any of the new models with electrohydraulic brakes, especially after reading of issues involved with changing the pads and the problem described here. I also was unimpressed with the pedal feel at lower speeds in the new E500 I had for an extended test drive.
__________________
107.023: 350SLC, 3-speed auto, icon gold, parchment MBtex (sold 2012 after 29 years ownership).
107.026: 500SLC, 4-speed auto, thistle green, green velour.
124.090: 300TE, 4-speed auto, arctic white, cream-beige MBtex.
201.028: 190E 2.3 Sportline, 5-speed manual, arctic white, blue leather.
201.028: 190E 2.3, 4-speed auto, blue-black, grey MBtex.
201.034: 190E 2.3-16, 5-speed manual, blue-black, black leather.
Reply With Quote
  #12  
Old 07-31-2003, 09:31 PM
Gilly's Avatar
Registered User
 
Join Date: Mar 2001
Location: Evansville WI
Posts: 9,616
That's nothing, you should hear about the brake fluid flushing procedure and recalibration afterwards. Whew! And they still expect it to be done every 2 years.

I just remembered the rotor-drying thing that SBC does is called "Dry Braking", I was thinking of "Soft Stop" before, which MB describes as a feature which eliminates the "annoying jerk" at the end of the stop. Last time I tried it the annoying jerk was still in the right seat when i came to a stop.

Gilly
Reply With Quote
  #13  
Old 07-31-2003, 09:41 PM
Moderator
 
Join Date: Jul 2001
Location: Woolwich, Maine
Posts: 3,598
Gilly,

Now that would be a feature even I would pay extra for! Jim
__________________
Own:
1986 Euro 190E 2.3-16 (291,000 miles),
1998 E300D TurboDiesel, 231,000 miles -purchased with 45,000,
1988 300E 5-speed 252,000 miles,
1983 240D 4-speed, purchased w/136,000, now with 222,000 miles.
2009 ML320CDI Bluetec, 89,000 miles

Owned:
1971 220D (250,000 miles plus, sold to father-in-law),
1975 240D (245,000 miles - died of body rot),
1991 350SD (176,560 miles, weakest Benz I have owned),
1999 C230 Sport (45,400 miles),
1982 240D (321,000 miles, put to sleep)
Reply With Quote
  #14  
Old 07-31-2003, 11:21 PM
Registered User
 
Join Date: Jul 2003
Location: Laguna, CA
Posts: 16
Quote:
Originally posted by JimSmith


vapors2k,

If you put the car in neutral and let it coast after getting up some speed, does the car coast or does it slow down a little faster than you would expect?

I agree you need to find out what the problem is, and I do not think it is confined to needing new pads. Good luck, Jim
I will perform this to see if the car slows down too much. thnx!
Reply With Quote
  #15  
Old 08-01-2003, 09:45 PM
Registered User
 
Join Date: Jul 2003
Location: Laguna, CA
Posts: 16
*UPDATE*

When I put the car into neutral, the speed goes down normally, not abruptly as if the brakes were engaged. Whatever was wrong has apparently been fixed. I forgot to mention that after the car was serviced for the pad indicator light, the car has been a little quicker and seems as though those rear pads were dragging. How do I prove it? I don't think I can, and I had to eat the cost of the pads and labor ~ $220.00.

Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 07:17 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page