|
|
|
#1
|
||||
|
||||
Help! Problem after changing wire harness
I had a busy Saturday changing the wiring harness on my 95 E320 Wagon. The car ran really well afterwards and I used it on Saturday afternoon and Sunday. This morning just as I was trying to go to work, the car started then died after less than a second. It can crank just fine so it is not a battery. It just does not want to start.
I know this can be quite a wide range of issues especially after changing the wiring harness. But it seems strange that it ran fine all weekend and chose Monday morning to give me problems. I will be rushing home at my lunch break to try to look over the car and especially check the connections of the harness. I wanted to see if there could be any additional things I could try. Maybe disconnect the battery to reset the computer? I appreciate any help!
__________________
Benson 1995 E320 Wagon 1996 Volvo 850GLT |
#2
|
||||
|
||||
Probably not wire harness
Looks like the problem is not related to the wiring harness (I hope). After looking over all of the connections, everything looked pretty good. I do suspect a fuel problem, though. You would think after trying to crank the engine for 5-10 seconds you should smell unburned gas out the tailpipe, but no, it is very weak. Could I suspect a fuel pump or something related? Please help! I have no car and I'm using my wife's car right now.
__________________
Benson 1995 E320 Wagon 1996 Volvo 850GLT |
Bookmarks |
|
|