|
|
|
#1
|
|||
|
|||
'84 190E 2.3 w/ 154,000 miles has very inconsistent shifting. Sometimes it takes some coaxing to get it to shift up from first gear. Almost always shifts through gears faster than desired until the motor is laboring at low rpm. Doesnt want to stay in 2 or 3 too long. Often shifts into 3 or 4 with a bang. Makes no diference whether under hard acceleration or when babying it around town. No problem with slipping or highway driving. Sometimes all seems well.
Lat year I had the tranny out to replace the seals. Replaced trans throttle cable. Adjusted in the middle of the goove on the plastic adjuster up near the trhottle body linkage. also relaced the fluid, filter and pan gasket. R&R all driveshaft flex plates and recently put a used differential carrier in. Ran ok for many months, but getting a little crazy lately. Any thoughts fellas? Pat Leber 84 190E 2.3 Auto 83,84,85.5 Porsche 944 |
#2
|
|||
|
|||
As many of the internal seals are made from teflon type material, time & mileage will catch-up with them. Sounds like your car is close to that point. Always start off with fresh fluid & filter before spending the big $$$$.
|
#3
|
|||
|
|||
Thanks for your response MB Doc. Do you have any leads that I could tuck into my roledex on a rebuilt unit with or a used low mileage one for when I really need it? I wont venture inside one of those automatic gearboxes. Too many mysteries, unlike some real gears in a manual!
quote: |
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Automatic trans. shifting question | augusta | ML, GL, G-Wagen, R-Class, Unimog, Sprinter | 0 | 11-02-2003 09:08 AM |
Manually shifting a automatic 300E...is it bad??? | mike690003 | Tech Help | 10 | 09-19-2003 01:48 PM |
1991, 190E, 2.3. Automatic Transmission kicks shifting up. | Omran | Tech Help | 2 | 08-08-2003 09:29 AM |
300SD automatic adjusting shifting speed | rust2treasure | Diesel Discussion | 3 | 01-30-2002 06:40 PM |
Manual shifting of an automatic tran | Mercedes Fred | Tech Help | 4 | 08-01-2001 01:30 PM |