Quote:
Originally Posted by greazzer
So, in other words, once the pulley is in the place where it would make the belt tight, then simply tighten the bolt head where it rests near the oil dip stick tube. I am surprised its that simple and it will hold. I guess I will be finding out pretty soon. LOL. Thanks ROLLGUY!
|
When the eccentric is used on any other application, a shorter bolt tightens the eccentric against a flat surface. In this application, the bolt just happens to be about 7 inches long, and squeezes the sleeves welded to the plate and the boss on the block as well as holding the eccentric from turning.