Quote:
Originally Posted by TheDon
You are using a stock relay, what looks like a two prong connector, and a third that I cannot tell what style connector but it's OEM.
My sanden I got from you only has a single red wire, so what do I do with the brown wire next to the blue? Just forget about it?
What rating is the blade fuse?
I'm probably going to do this mod. I just need to double check that the fan still works...
|
The Sandsn's usually only have one wire=+12v. Just connect it to the same + wire of the fan. You can use a universal relay, or a stock one, the terminal numbers should be the same. The relay coil is energized by the existing compressor clutch wiring, and the N.O. contacts of the relay connect +12v to the + of the fan and compressor clutch. Both the - wires of the fan and clutch (if two wire) get connected to ground. I used a 15 amp (blue) fuse in the fuse holder......Rich