Quote:
Originally Posted by funola
Questions:
1. Photo 3 does not have a beadlock type ferrule. Why didn't you use a weld-on beadlock type?
2. In photo 4, what kind of fitting was welded on to the pipe? What kind of pipe is that and why was that work necessary?
|
The fitting in photo 3 is a custom fitting that has a #8 barb brazed to a #10 fitting (used in my Sanden hose kits).
The fitting welded on the pipe is done on all the 123 Sanden retrofits, so a hose can be connected from that pipe (low side hard pipe going on top of a 616 or 617 in a 123) to the compressor. Check out the PDF installation guide link in my signature.