Quote:
Originally Posted by Murkybenz
Use the Mityvac to pull vacuum on a large drum as the return line flow is about half a litre a minute at tickover, big drum will allow you to keep the engine running until it fills up.
|
This worked awesome! I punched two holes into a canning jar lid, and put two hoses in it. One went to the return fitting, the other to a hand vac pump. I had the supply hose in a can of new clean fuel. After pumping and seeing no bubbles in the lines, the engine started up the third or fourth crank! It did stumble a little at first, but smoothed right out. Thanks!