I'm going a little nuts. My service manual and numerous posts point to the injection nozzles on my 606.910 engine requires a deep 22mm socket with the side cut out so as to not damage the return line hose barbs.

The thing is I cannot even get a 22mm socket past the top of the injector holder?

From what I can measure deep down in the well, it looks like the holder hex is more like 27mm.

I'm attaching a pdf picture if it helps. Sorry the depth of field is really hard to capture.

Has anyone with a 606 engine found that they needed a larger socket to remove the injector holder?

Thanks for your help ahead of time.

Attached Files

injector_top.pdf (635.6 KB, 218 views)

__________________
Best Regards,
Jeff L

1984 300SD 247K+ miles - single tank w/ heat exchanger to run WVO - sold
1997 Ford F350 7.3L International turbo diesel crew cab with 100 gal transfer tank to hold B100
1995 E300D 245K+ miles running BioDiesel - my daily driver

Live Long and Prosper