Quote:
Originally Posted by WarTowels
Brakes:
Attempted to free the front rotors from the hub with my new electric impact wrench (350 ft lb supposedly) and it didn't stand a chance. The 10mm hex bit I have though is 3/4" so I did have to convert it to 1/2" for the impact wrench, but I don't think that made much if any difference.
I don't think I'm going to bother trying to get them off with a breaker bar, just going to take them down to a shop with a stronger impact wrench.
|
I have removed many a rotor from the hub by bolting it to a wheel, and using the hex socket on a breaker bar. It works every time......Rich
12-12-2014, 02:39 AM
Threaded Mode
