Quote:
Originally Posted by lph_tran
Hello--
Would some please help me since I've tried these steps and was not able to reset the negative (-) milleage for my 2003 ML500? THANK YOU!
FSS reset - Shut door, wait until the dome lamp goes off.
- Turn key to position 2.
- Within 4 seconds press button 1 twice.
- The present status for days or distance is displayed. Within 10 seconds turn key in steering lock to position 0.
- Press and hold button 1, while turning key in steering lock to position 2 again. The present status for days or distance is displayed once more. Continue to hold button 1. After aproxtamely10 seconds a signal sounds, and the display shows 10,000 miles for approximately 10 seconds.
- Release button 1.
|
How to reset FSS after an oil change
close all doors
turn ignition key to position 2
press reset button twice within 4 seconds
turn ignition back to pos 1
press and hold the reset button
turn ignition to pos 2
keep pressing the reset button until buzzer sounds and new miles display appears
11-13-2008, 04:36 PM
Threaded Mode
