Quote:
Originally Posted by jabstick420
here is a pic. you can see the dowel slot on the right side of the crank, bottom edge has a bevel.
tried to round it off and sand smooth.
a real bummer.
now getting the dowel pins in there seems to be a real challenge.
they don't seem to want to go. checked and rechecked the alignment of the crank and hb.
any secrets to this? or is it just hard pounding?
thx
|
Use the crank bolt to draw the hub into place, with the dowel pins fitted to the slots in the crank. It has worked this way every time for me. It seems near impossible to put the pins in afterward....Rich