|
The last one I had done locally was less than $400 IIRC. He pressure checked, machined the surface, ground the valves, and installed the seals I provided. I had to remove the prechambers and re-install them with new seal rings. Most any machine shop can do one of these, they are not unlike any other 6 cyl head that they would do. The only exception being the prechambers. Unless they are familiar with this type, you may (probably should anyway) have to remove the PC's prior to having the shop do the work. My guy had never done a Diesel head before meeting me, but with the PC's removed, he treated it like any other head, and it was no problem.
|