Be sure you don`t buy this Flex gun

http://www.youtube.com/watch?v=EvwD83mQUQA


Charlie

__________________
there were three HP ratings on the OM616...

1) Not much power
2) Even less power
3) Not nearly enough power!! 240D w/auto

Anyone that thinks a 240D is slow drives too fast.

80 240D Naturally Exasperated, 4-Spd 388k DD 150mph spedo 3:58 Diff

We are advised to NOT judge ALL Muslims by the actions of a few lunatics, but we are encouraged to judge ALL gun owners by the actions of a few lunatics. Funny how that works

The guy in this video is an idiot, but at least you get to see how the flexx gun and flexx boots work. Armando shot and uploaded this sideways. Just lay down to watch it....

http://www.youtube.com/watch?v=tKvZXgxQc2Q

Loser........

__________________
Jimmy L.
'05 Acura TL 6MT
2001 ML430 My Spare

Gone:
'95 E300 188K "Batmobile" Texas Unfriendly Black
'85 300TD 235K "The Wagon" Texas Friendly White
'80 240D 154K "China" Scar engine installed
'81 300TD 240K "Smash"
'80 240D 230K "The Squash"
'81 240D 293K"Scar" Rear ended harder than Elton John

Hmmmm....

What about a direct bolt-on boot????

__________________
Did you just pass my 740 at 200 kmh in a 300SD?????

1978 300SD 'Phil' - 1,315,853 Miles And Counting - 1, 317,885 as of 12/27/2012 - 1,333,000 as of 05/10/2013, 1,337,850 as of July 15, 2013, 1,339,000 as of August 13, 2013



100,000 miles since June 2005 Overhaul - Sold January 25th, 2014 After 1,344,246 Miles & 20 Years of Ownership

that's the gun I use (and rent out), and it works great. it's much easier to use than that guy makes it out to be... there's no need to pull from the little end, just grab the boot and pull it off. it'll go inside out at the end, but it's easy to just pull it back to the can and it'll go back right side out.
also, there is no need to expand the tool to get it off. just pull it up and out.
my gun has had the fingers polished smooth. I didn't like the stamped edges that the tool comes with, so I hit them on the grinder, and polished up the result.
I think the tool works better this way.
and I've not split a single boot since.

__________________
John HAUL AWAY, OR CRUSHED CARS!!! HELP ME keep the cars out of the crusher! A/C Thread
"as I ride with my a/c on... I have fond memories of sweaty oily saturdays and spewing R12 into the air. THANKS for all you do!

My drivers:
1987 190D 2.5Turbo
1987 190D 2.5Turbo
1987 190D 2.5-5SPEED!!!

1987 300TD
1987 300TD
1994GMC 2500 6.5Turbo truck... I had to put the ladder somewhere!

The Flexx gun is the only intelligent way to replace a boot. Very thick rubber on the replacement units.

Yes the funnel works too ... but about as much fun as putting a condom on a less than appreciative elephant.

__________________
1985 300D 198K sold
1982 300D 202K
1989 300E 125K
1992 940T

"If you dont have time to do it safely, you dont have time to do it"

"The democracy will cease to exist when you take away from those who are willing to work and give to those who would not."

The pics explain themselves

Attached Thumbnails

   

__________________
84 300D, 82 Volvo 244Gl Diesel

Well there is an in between Choice.
Buy the Cone made by Astoria or buy and Astro Pneumatic Cone and enlarge the ID as I did and use only the Cone part.
I don't advise using the Tongs that are in the picture as I ripped a Boot with the Tongs. I did not rip any Boots when I used the Cone by itself.

Attached Thumbnails

 

__________________
84 300D, 82 Volvo 244Gl Diesel