|
|
|
#1
|
||||
|
||||
616.916 vs. 616.912
Thinking about swapping the engine from my parts car (616.912) into my w115 (has a 616.916) and was wondering if I'm gonna encounter any big issues. I know the oil filter setups are different, not sure about anything with the oil pans or not, which is where I suspect there might be issues
Thanks!
__________________
1982 300D Turbodiesel, daily driver. Mods so far: Fram 8038 paper filter, 4 brake light mod, Gen II w126 (front) rotors/calipers, boost turned up to 12lbs, non-egr manifolds, water/methanol injection, 4-speed manual 1980 300SD Turbodiesel, project car, nearly ready to hit the street 1974 240D, New paint |
#2
|
||||
|
||||
Hey Kid, anything can be done. Mostly just takes time. Sometimes money is helpful. But I'd say they are switchable. Here is the listing from the Russian EPC. It is easy to use and has everything Mercedes Benz built. Does not show all part numbers, but has drawings of everything. You will love it.
Index to Mercedes EPC Parts Info and Diagrams | Everything Benz
__________________
Junqueyardjim Christianity, if false, is of no importance, and if true, of infinite importance. The only thing it cannot be is moderately important. C.S. Lewis 1983 Mercedes W123 240D 4 Speed 285,000 on the road with a 617 turbo, beautiful butter yellow, license plate # 83 240D INDIANA 2003 Jaguar Type X, AWD. beautiful, good mileage, Mom's car, but I won't let her drive it! |
#3
|
|||
|
|||
the oil filter might end-up in the middle of your heater valves .
lots of small things power steering pump diff location , not sure if easy swap mounts on the blocks or not .. oil pressure line is different end on it .. you prob want to swap manifolds to save having to reweld the pipe ... you will need to swap motor mounts as the 123 and 115 are different ..
__________________
current fleet Ford f350 dully 7.3L 1990 . ats turbo , zf5 Mazda 4x4 b2600 with 617 20-26 mpg Past fleet 1983 240D w123 232k 25-30 MPG 1984 Ford f250,1979 ford 150 300-6 (sold@ 251K ) 81 300D, 79 240D , 2x 76 300D ,74 240D , 2x 89 grand prix , 85 grand fury , and several other fords Custom machine shop work .. |
#4
|
||||
|
||||
Bump to revive this head as I have a few more questions.
Thinking about adding a turbo to the w115 to get it a little more peppy, so what I'm thinking about doing is getting an extra head and have it rebuilt with turbo exhaust valves, turbo prechambers/injectors, and also getting an injection pump from a later model 616. Anyway, I'm wondering if there's any major differences between the earlier and later heads that would prevent me from getting a later one and putting it on? Also curious if there's any major pump differences, since I know the early ones are very different in design? I have a set of exhaust flanges and several mandrel bent pieces of tubing I'll be using to make a custom exhaust manifold to enable mounting the turbo, and I plan on keeping boost low, around 8 psi or so, and not really running WOT for long periods of time, so I'll be monitoring boost and egt to make sure I don't get it hot enough to cause problems down the road. Any additional input is appreciated folks!
__________________
1982 300D Turbodiesel, daily driver. Mods so far: Fram 8038 paper filter, 4 brake light mod, Gen II w126 (front) rotors/calipers, boost turned up to 12lbs, non-egr manifolds, water/methanol injection, 4-speed manual 1980 300SD Turbodiesel, project car, nearly ready to hit the street 1974 240D, New paint |
#5
|
|||
|
|||
For the heads you may encounter different camshafts, prechambers, etc as engines post 8/78 (I think) had all those bits changed
"Turbo" prechambers may punch your pistons, not sure.
__________________
1978 300D, 373,000km 617.912, 711.113 5 speed, 7.5mm superpump, HX30W turbo...many, many years in the making.... 1977 280> 300D - 500,000km+ (to be sold...) 1984 240TD>300TD 121,000 miles, *gone* 1977 250 parts car 1988 Toyota Corona 2.0D *gone* 1975 FJ45>HJ45 1981 200>240D (to be sold...) 1999 Hyundai Lantra 1.6 *gone* 1980s Lansing Bagnall FOER 5.2 Forklift (the Mk2 engine hoist) 2001 Holden Rodeo 4JB1T 2WD |
#6
|
||||
|
||||
I believe there's some machining involved with fitting turbo prechambers but they should fit, I think another member on here (47dodge) put them in his turbo 240D build
__________________
1982 300D Turbodiesel, daily driver. Mods so far: Fram 8038 paper filter, 4 brake light mod, Gen II w126 (front) rotors/calipers, boost turned up to 12lbs, non-egr manifolds, water/methanol injection, 4-speed manual 1980 300SD Turbodiesel, project car, nearly ready to hit the street 1974 240D, New paint |
#7
|
||||
|
||||
Quote:
http://www.startekinfo.com/StarTek/outside/12265/disc_2/program/Engine/615/05-117.pdf
__________________
1992 W201 190E 1.8 171,000 km - Daily driver 1981 W123 300D ~ 100,000 miles / 160,000 km - project car stripped to the bone 1965 Land Rover Series 2a Station Wagon CIS recovery therapy! 1961 Volvo PV544 Bare metal rat rod-ish thing I'm here to chat about cars and to help others - I'm not here "to always be right" like an internet warrior Don't leave that there - I'll take it to bits! |
#8
|
|||
|
|||
Kid, this is a bad idea and you need to do a lot more studying before you start it... the fact that you do not know that the turbo setup of the engine .. .like the pistons which are cooled by oil squirters from the engine block... means you need to get a lot more familiar with MB diesels in general before you make a big decision on this car.
__________________
1980 240d , chain elongation, cam marks reference: http://www.peachparts.com/shopforum/diesel-discussion/10414-help-i-need-check-stretch.html http://www.peachparts.com/shopforum/diesel-discussion/305365-9-degrees-chain-stretch.html evap fin cleaning: http://www.peachparts.com/shopforum/diesel-discussion/156207-photo-step-step-post-showing-w123-evaporator-removal-1983-240d-1982-300td.html?highlight=evaporator A/C thread http://www.peachparts.com/shopforum/diesel-discussion/297462-c-recommendations-mb-vehicles.html |
#9
|
||||
|
||||
I'm literally doing the exact same thing as 47dodge did in this thread, with no ill affects, except on an older 616 than he used
new engine build 616
__________________
1982 300D Turbodiesel, daily driver. Mods so far: Fram 8038 paper filter, 4 brake light mod, Gen II w126 (front) rotors/calipers, boost turned up to 12lbs, non-egr manifolds, water/methanol injection, 4-speed manual 1980 300SD Turbodiesel, project car, nearly ready to hit the street 1974 240D, New paint |
#10
|
||||
|
||||
All of the performance things on the turbo engines like the oil squirters and oil cooled pistons are there to help increase their life over hundreds of thousands of miles of driving WOT on the autobahn, whereas I probably won't be taking the car over 70, maybe 75 max, for short periods (such as passing and merging on the freeway), and I'll be monitoring exhaust temperatures to make sure they don't exceed 1000-1100*F max (I seriously doubt I could get it up to 1100 though, and if I did I wouldn't let it stay there for more than a few seconds)
__________________
1982 300D Turbodiesel, daily driver. Mods so far: Fram 8038 paper filter, 4 brake light mod, Gen II w126 (front) rotors/calipers, boost turned up to 12lbs, non-egr manifolds, water/methanol injection, 4-speed manual 1980 300SD Turbodiesel, project car, nearly ready to hit the street 1974 240D, New paint |
#11
|
|||
|
|||
Quote:
If you look at this in the bigger picture... you could transplant a NA 617 into your car... still not fun due to the oil filter placement problem.... but get that twenty horses in a form which you could expect very long life from it.... One type of thing you are overlooking ... is that the size of the bearings on things like the rod to crank were increased ....and the assumption that you can watch the EGT close enough to keep from melting the top of a piston... unnecessarily puts your entire project at risk after a lot of work and money is invested... I do not care what you do with your car... it is your car... so these comments are for others in case they wonder why I think it is a bad idea...
__________________
1980 240d , chain elongation, cam marks reference: http://www.peachparts.com/shopforum/showthread.php?threadid=10414 http://www.peachparts.com/shopforum/diesel-discussion/305365-9-degrees-chain-stretch.html evap fin cleaning: http://www.peachparts.com/shopforum/diesel-discussion/156207-photo-step-step-post-showing-w123-evaporator-removal-1983-240d-1982-300td.html?highlight=evaporator A/C thread http://www.peachparts.com/shopforum/diesel-discussion/297462-c-recommendations-mb-vehicles.html |
#12
|
||||
|
||||
Well the extra power will only be used during acceleration, which is what, maybe 5% of actual driving time? I think it shouldn't be much of a problem as long as there's proper maintenance and everything is taken care of. And seeing as how later 616 engines made 72hp with the same block, and only minor head differences than the early ~60ish hp one, and I'm aiming for around 80hp, that's only about an 11% increase in power over what we know stock 616 engines in good running shape make without any issues
__________________
1982 300D Turbodiesel, daily driver. Mods so far: Fram 8038 paper filter, 4 brake light mod, Gen II w126 (front) rotors/calipers, boost turned up to 12lbs, non-egr manifolds, water/methanol injection, 4-speed manual 1980 300SD Turbodiesel, project car, nearly ready to hit the street 1974 240D, New paint |
#13
|
||||
|
||||
Quote:
You will be fine, watch your piston/prechamber mixes to get the right clearance & fit. You can take measurements with clay and turn the crank by hand. If the head comes off, smooth your transitions near the valve seat-that's the choke point. If you're worried about bearing deformation and bending rods, don't fuel too hard on the low end. With stock elements you won't have enough diesel to break anything. I do know a guy who blew up a NA 617 by turboing it, but he didn't monitor anything-just slapped it together and drove around. I'd put money on the 616 block holding up to 120hp no problem. You're on your own for fueling to that point though
__________________
$60 OM617 Blank Exhaust Flanges $110 OM606 Blank Exhaust Flanges No merc at the moment |
#14
|
||||
|
||||
Yup, I'm living proof of that.
__________________
http://superturbodiesel.com/images/sig.04.10.jpg 1995 E420 Schwarz 1995 E300 Weiss #1987 300D Sturmmachine #1991 300D Nearly Perfect #1994 E320 Cabriolet #1995 E320 Touring #1985 300D Sedan OBK #42 |
#15
|
||||
|
||||
Quote:
Last edited by vstech; 02-04-2015 at 11:43 AM. |
Bookmarks |
|
|