|
|
|
|
|
#1
05-09-2014, 11:08 AM
|
||||
|
||||
|
Has anyone else made this DIY rear slot nut tool?
Needed to remove a rear wheel bearing.
The link to the homemade tools site is: Homemade Slot Nut Socket There is a link there to the original PP thread. Probably qualifies as the least detailed DIY in existence.... 
__________________
 Mac 2002 e320 4matic estate│1985 300d│1980 300td Previous: 1979 & 1982 & 1983 300sd │ 1982 240d “Let's take a drive into the middle of nowhere with a packet of Marlboro lights and talk about our lives.” ― Joseph Heller, Catch-22 
|
|
#3
05-09-2014, 12:29 PM
|
||||
|
||||
|
Yes, I wish I could do stuff like some of those guys do just for giggles.
__________________
Mac 2002 e320 4matic estate│1985 300d│1980 300td Previous: 1979 & 1982 & 1983 300sd │ 1982 240d “Let's take a drive into the middle of nowhere with a packet of Marlboro lights and talk about our lives.” ― Joseph Heller, Catch-22
|
|
#4
05-09-2014, 01:45 PM
|
||||
|
||||
|
I have my reservations making a tool for this job. Now I'm not saying it isn't worth giving it a go if you can do it but I do think you need to be realistic in your expectations...
...trying to tighten those sodding slotted nuts on W114/W115/W123/126(1st gen) trailing arm wheel bearings is in my opinion not an easy (as in physically easy) job to do. To crush a new crush washer by tightening one of those slotted nuts is not trivial - a similar crush washer exists on differential pinion shafts. When struggling with a differential pinion bearing crush washer I used a hydraulic press to help it along and measured 7 metric tons => The W201 differential refresh thread To remove the slotted nut I recommend the following method => W123 rear wheel bearing removal help needed
__________________
1992 W201 190E 1.8 171,000 km - Daily driver 1981 W123 300D ~ 100,000 miles / 160,000 km - project car stripped to the bone 1965 Land Rover Series 2a Station Wagon CIS recovery therapy! 1961 Volvo PV544 Bare metal rat rod-ish thing I'm here to chat about cars and to help others - I'm not here "to always be right" like an internet warrior  Don't leave that there - I'll take it to bits!
|
|
#5
05-09-2014, 02:00 PM
|
||||
|
||||
|
That tool is for rental.
__________________
http://superturbodiesel.com/images/sig.04.10.jpg 1995 E420 Schwarz 1995 E300 Weiss #1987 300D Sturmmachine #1991 300D Nearly Perfect #1994 E320 Cabriolet #1995 E320 Touring #1985 300D Sedan OBK #42
|
|
#6
05-10-2014, 12:00 AM
|
|||
|
|||
|
The issue with rental might be getting it across the border. You would know more about that than I.
My thinking is that an impact socket might be better for modification. Harder to modify but more durable. I wonder if KTC tools would export to Canada? Mercedes Benz Tools | KTC Auto Tools distribute a full line of Specialty Tools
__________________
Sam 84 300SD 350K+ miles ( Blue Belle )
|
|
#7
05-10-2014, 12:40 AM
|
||||
|
||||
|
Quote:
I will give it some thought. I am still on the fence on whether this is one DIY I should be diving into. Tks
__________________
Mac 2002 e320 4matic estate│1985 300d│1980 300td Previous: 1979 & 1982 & 1983 300sd │ 1982 240d “Let's take a drive into the middle of nowhere with a packet of Marlboro lights and talk about our lives.” ― Joseph Heller, Catch-22
|
|
#8
05-10-2014, 01:37 AM
|
|||
|
|||
|
I changed the rear wheel bearing and seals on mine and learned a few things. Two important things really stand out.
Use hardened bolts (class 10.9 if you can get them but 8.8 at a minimum) to replace the wheel bolts when applying torque to the hub. Use a long bar (6 foot is best) to tighten to tolerances. Anything less will be futile. (I used a homemade tool with a jack handle over it. Similar to the holding tool for universal flange shown here: http://www.startekinfo.com/StarTek/outside/12253/program/Chassis/35-530.pdf I used 5/16" bar stock and cut it for the side piece with three bolts) If you want a photo, I will have to learn how to attach it to a post or just e-mail in a PM. The problem I ran into was getting the bar at a right angle to the hub. If it isn't, the tools tend to slip off with the pressure needed to get it tight enough. It isn't that difficult if you have these items in advance.
__________________
Sam 84 300SD 350K+ miles ( Blue Belle )
|
|
#9
05-10-2014, 12:14 PM
|
||||
|
||||
|
Quote:
For this small thing, however, it would be cost effective for sure. Thanks.
__________________
Mac 2002 e320 4matic estate│1985 300d│1980 300td Previous: 1979 & 1982 & 1983 300sd │ 1982 240d “Let's take a drive into the middle of nowhere with a packet of Marlboro lights and talk about our lives.” ― Joseph Heller, Catch-22
|
 |
| Bookmarks |
|
|
Linear Mode
