The LCA's are the same, the mounting points are the same, but I can find little info on the installation of the bushings.

The center puc gets installed right side up with the fat areas parallel with the arm... Ok.

The outer pucs must get pressed into the center puc shaft, and the metal edge of the outer pucs must be pressed into the LCA. BUT ACCOMPLISHING THS RESULTED IN DAMAGE TO THE OUTER PUC...

I think a machine shop tool needs to be made to do this without damaging the outer part...


If there is experienced installers on here that have successfully done this and can offer tips or pics, I'd be grateful...

__________________
John HAUL AWAY, OR CRUSHED CARS!!! HELP ME keep the cars out of the crusher! A/C Thread
"as I ride with my a/c on... I have fond memories of sweaty oily saturdays and spewing R12 into the air. THANKS for all you do!

My drivers:
1987 190D 2.5Turbo
1987 560SL convertible
1987 190D 2.5-5SPEED!!!

1987 300TD
2005 Dodge Sprinter 2500 158"WB
1994GMC 2500 6.5Turbo truck... I had to put the ladder somewhere!