I made a few speed runs today, and monitored the rail pressure. At idle, it hovers around 350 bar, and gets to about 1,600 bar at the highest (still belching black smoke). I can rev it up just sitting with it in park, and it will hit as high as 1,000 bar. I am not sure if these numbers are in spec or not. Something to be noted though, I am having to touch the pedal slightly to get it to start. If I don't, it will run through it's cranking cycle and not start. Either warm or cold, it is the same.

__________________

All Diesel Fleet
1985 R107 300SLD TURBODIESEL
2005 E320 CDI (daily)

LOTS of parts for sale!


EGR block kit
http://www.peachparts.com/shopforum/diesel-discussion/355250-sale-egr-delete-block-off-plate-kit.html

1985 CA emissions 617 owners- You Need This!
Sanden style A/C Compressor Mounting Kit for your 616/ 617 For Sale + Install Inst.

Sanden Instalation Guide (post 11):
http://www.peachparts.com/shopforum/diesel-discussion/367883-sanden-retrofit-installation-guide.html