|
|
|
|
|
#1
04-14-2018, 04:41 PM
|
|||
|
|||
|
New Caliper bolts needed? 83 300TD
I'm rebuilding the front end and in the process have removed the front calipers. Do I need to install new mounting bolts when I reinstall the calipers? Or can I safely clean up the old ones, coat them with locktite and re-use them?
Thanks, Jim
__________________
JIM 83 300TD 2006 Sprinter 2500 (RV Conversion) 06 E320 CDI, Sold 83 240D, manual, Sold 79 240D, automatic, Sold 
|
|
#2
04-14-2018, 04:49 PM
|
||||
|
||||
|
Old ones are fine. I have replaced several calipers over the years and have always used the original bolts. In fact I do not remember new bolts coming with the rebuilt calipers.
|
|
#3
04-14-2018, 04:49 PM
|
||||
|
||||
|
I personally have never replaced these bolts with new. Just a new coat of locktite should be fine. I have never had one of these bolts come loose......Rich
__________________
 All Diesel Fleet 1985 R107 300SLD TURBODIESEL 2005 E320 CDI (daily) LOTS of parts for sale! EGR block kit http://www.peachparts.com/shopforum/diesel-discussion/355250-sale-egr-delete-block-off-plate-kit.html 1985 CA emissions 617 owners- You Need This! Sanden style A/C Compressor Mounting Kit for your 616/ 617 For Sale + Install Inst. Sanden Instalation Guide (post 11): http://www.peachparts.com/shopforum/diesel-discussion/367883-sanden-retrofit-installation-guide.html
|
|
#5
04-15-2018, 10:43 AM
|
||||
|
||||
|
be sure you use LOCTITE... the blue should be fine, not the red.
not ANTISIEZE/NEVERSIEZE...
__________________
John HAUL AWAY, OR CRUSHED CARS!!! HELP ME keep the cars out of the crusher! A/C Thread "as I ride with my a/c on... I have fond memories of sweaty oily saturdays and spewing R12 into the air. THANKS for all you do! My drivers: 1987 190D 2.5Turbo 1987 560SL convertible 1987 190D 2.5-5SPEED!!!  1987 300TD 2005 Dodge Sprinter 2500 158"WB 1994GMC 2500 6.5Turbo truck... I had to put the ladder somewhere!
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
