|
|
|
#1
|
|||
|
|||
Mystery Bolt
Hello all. While preparing to adjust the valves on the 1980 300SD, I found this bolt on the ground near the front passenger wheel. I searched as best I could but could not find an assembly that was missing this bolt. Going to jack up the front end sometime today to get a better look but thought I would ask for help targeting the spot before then.
Thanks for the help! John
__________________
John V 1979 300D 1980 300SD |
#2
|
|||
|
|||
Looks like something from an idler pulley or belt tensioner. Or maybe an intake manifold bolt.
|
#3
|
|||
|
|||
starter mount bolt?
check pic # 4 from this thread Pictorial: W123 300D Turbo Starter Motor Replacement |
#4
|
||||
|
||||
I think the Starter Bolts are longer.
Brake Caliper blot or one of the bolts that retains the Disc to the Hub. Motor Mount bolts? I can't remember the size of the bolts for the bracket at the rear of the starter nor the ones that hold the brace below the Turbo Charger.
__________________
84 300D, 82 Volvo 244Gl Diesel |
#5
|
|||
|
|||
Bolt for clamp for transmission oil cooler line?
__________________
78 W116 300SD 'Desert Rose' new as of 01/26/2014 79 W116 300SD 'Stormcloud' RIP 04/11/2022 |
#6
|
|||
|
|||
Thanks for all the suggestions! After jacking the car, I proceeded to check the possibilities and found the spot - engine damper bolt.
__________________
John V 1979 300D 1980 300SD |
#7
|
||||
|
||||
Yes, definitely engine mount (damper) bolt.
__________________
All Diesel Fleet 1985 R107 300SLD TURBODIESEL 2005 E320 CDI (daily) LOTS of parts for sale! EGR block kit http://www.peachparts.com/shopforum/diesel-discussion/355250-sale-egr-delete-block-off-plate-kit.html 1985 CA emissions 617 owners- You Need This! Sanden style A/C Compressor Mounting Kit for your 616/ 617 For Sale + Install Inst. Sanden Instalation Guide (post 11): http://www.peachparts.com/shopforum/diesel-discussion/367883-sanden-retrofit-installation-guide.html |
Bookmarks |
|
|