Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 05-25-2005, 03:35 PM
Registered User
 
Join Date: Nov 2003
Posts: 161
Dip stick reading

1989 300E
I seem to remember reading in the Star that said the difference between the top and bottom of the dip stick was 2 quarts of oil. Is that correct? I just added one quart and it seems to bring it from the top of the bottom red marker to near the bottom of the top red marker on the dipstick. Any comments?

Reply With Quote
  #2  
Old 05-25-2005, 08:43 PM
Gilly's Avatar
Registered User
 
Join Date: Mar 2001
Location: Evansville WI
Posts: 9,616
Yes, this is what I've alway heard as well, 2 quart operating range. maybe you added oil while it was still draining into the pan? Most MB's seem to take a long time for all the oil to drain down, 10-20 minutes.
Gilly
Reply With Quote
  #3  
Old 05-25-2005, 08:52 PM
Registered User
 
Join Date: Mar 2003
Location: Southern California
Posts: 2,277
It's actually two liters which is about 2.1 quarts, but it may not be linear between the marks.

The correct oil evel is measured with the car on a level surface a few minutes after shutting down a fully warmed up engine. Check it the next morning and it will be higher. Let it sit a few days and it will be yet higher.

Duke
Reply With Quote
  #4  
Old 05-26-2005, 09:17 AM
Registered User
 
Join Date: Aug 2002
Location: Southeastern PA
Posts: 3,077
krjt, my experience is that the distance between the red plastic markers equates to 1 quart. At oil changes I add enough oil to bring the level midway between the red markers ... adding a half quart will raise the level from the top of the lower red marker to the mid-point.
__________________
Fred Hoelzle
Reply With Quote
  #5  
Old 05-26-2005, 11:01 AM
Mike Murrell's Avatar
Registered User
 
Join Date: Feb 2000
Posts: 2,580
Quote:
Originally Posted by Ferdman
krjt, my experience is that the distance between the red plastic markers equates to 1 quart.
What motor are you referring to?

The M103 in mine takes 2 qts. to get from lower mark to top mark.
__________________
Mike Murrell
1991 300-SEL - Model 126
M103 - SOHC
"Fräulein"
Reply With Quote
  #6  
Old 05-26-2005, 05:54 PM
Registered User
 
Join Date: Aug 2002
Location: Southeastern PA
Posts: 3,077
Mike, I'm referring to a M104 in a 1991 and 1992 300CE.

__________________
Fred Hoelzle
Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
No xmission dip stick???? RConrad Mercedes-Benz SL Discussion Forum 4 11-22-2004 02:35 AM
No xmission dip stick???? RConrad Tech Help 5 11-20-2004 07:37 PM
Help Transmission Dip Stick broke off Dave Bunker Tech Help 9 08-16-2003 03:03 PM
C280 dip stick wentworthassoc Tech Help 1 02-15-2003 01:24 PM
Tranny Dip stick??? PLEASE help! 190D22 Diesel Discussion 19 12-06-2002 11:08 PM



All times are GMT -4. The time now is 09:01 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page