Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help




Go Back   PeachParts Mercedes ShopForum > Technical Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 04-27-2001, 04:17 PM
Registered User
 
Join Date: Apr 2001
Location: Oakland
Posts: 24
My passenger side will not go all the way up. It stops about an inch from the top. I goes all the way down and up
to that one inch point. Any ideas?
Reply With Quote
  #2  
Old 04-27-2001, 09:30 PM
Registered User
 
Join Date: Mar 1999
Location: Suwanee, GA, USA
Posts: 4,712
It sounds like the plastic guide has broken or the regulator has failed. The door panel will have to come off and the faulty part replaced.
__________________
Benzmac:
Donnie Drummonds
ASE CERTIFIED MASTER AUTO TECHNICIAN
MERCEDES SPECIALIST 11 YRS
Reply With Quote
  #3  
Old 04-27-2001, 09:52 PM
Senior Member
 
Join Date: Mar 2001
Location: Accokeek, MD
Posts: 683
Or the clip that holds the plastic guide has fallen off. If so look for a channel shaped black piece of rubberized plastic at the bottom of your door well once you have the door panel off. If you do not know how to take the door panel off ask before you try. Otherwise you will almost certainly break it.

Smiles.

[Edited by ejsharp on 04-27-2001 at 11:01 PM]
__________________
Earl



1993 190E 2.3
2000 Toyota 4x4 Tundra
Reply With Quote
  #4  
Old 04-27-2001, 10:02 PM
engatwork's Avatar
busy
 
Join Date: May 2000
Location: Soperton, Ga. USA
Posts: 11,777
or better yet

do a search.
Jim
Reply With Quote
  #5  
Old 04-27-2001, 11:43 PM
240Joe's Avatar
Registered User
 
Join Date: Nov 2000
Posts: 525
I owned an 87 300SDL, which is the diesel version of your car. I eventually replaced 3 of the 4 window regulators...and I thought we used the windows very sparingly.

I think these were the most disappointing failures I had with that car. MB really boned the design of the regulators...I'm sure as a "cost savings".

I had a saab that I beat to heck...15 years and 250kmiles... with power windows, and they always worked. Never had a power window failure.

I love MBs, but not anything newer than 85. Yes...I know..I'm obsolete.

Good luck..

Joe
Reply With Quote
  #6  
Old 04-27-2001, 11:58 PM
Senior Member
 
Join Date: Mar 2001
Location: Accokeek, MD
Posts: 683
Yep... I had to replace two on my rear doors. Former owner neglected repairs. That's why I think the problem may be the clip that holds the cable to the frame. If its not in place it allows the white rectangular plastic piece to shift inside it's metal mount and in turn restricts the movement of the window.
__________________
Earl



1993 190E 2.3
2000 Toyota 4x4 Tundra
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
motorized window problem 420sel polikratis Tech Help 2 01-16-2005 12:06 PM
Pass window, down only? edge Diesel Discussion 10 02-04-2004 08:31 AM
1993 300E rear pass window cable satkins1044 Tech Help 1 07-14-2003 01:06 PM
Pass. side front window won't go down unless door opened s500 Tech Help 0 07-04-2003 01:33 PM
S 500 Rear Pass. Window Problem Quist1 Tech Help 1 11-01-2001 08:50 PM



All times are GMT -4. The time now is 12:28 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2011 Pelican Parts - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page