|
|
|
#1
|
|||
|
|||
500E cold start racka racka's return
Donnie,
Dwight here again with the cold start racka racka's again. Quick reminder, Replaced Timing Chains Replaced Tensioner Replaced all rails Replaced Oil Filter Housing Check Valve (Bulletin AF05.20-P-1400EG/AF05.20-U-1400AG) (Part No. 119.184.0130) Rack - Racka still there ! Tried to replace Oil Pump check valve (pressure relief valve) (Procedure 18-2150) (part no. 119.180.0015) part was 27MM dia. and hole is only 24mm dia. so we cleaned up the original part and reinstalled. Surprise, the noise went away.....for a while ! Two weeks later the noise reappeared on cold start up after the car had set for several days. Accordingly, I must conclude that the source of the problem, in my car at least, is the oil pump relief valve and I have therefore resumed my efforts to replace the oil pump check valve. As I understand it, The OEM oil pump was 119.180.0901 and called for check valve part no. 119.180.0015 the check valve was superseded to 119.180.0133 and then superseded back to the original 119.180.0015 The oil pump has been superseded to 119.180.1701 and yet still calls for the check valve no. 119.180.0015 Why does this part not fit? Is it possible that 119.180.0015 only fits oil pumps 119.180.1701? How can I tell which oil pump is in my car? Does the casting number of the pump in my car, 119.186.0201 help in determining the oil pump number in any way? Any help would be appreciated.
__________________
dwight |
#2
|
|||
|
|||
check the air pump.
__________________
john '87 2.3-16v '92 500E |
#3
|
|||
|
|||
Sorry I have been out of touch for a while.
I have now replaced the oil pump and its associated check valve, but the racka racka's continue to haunt me. As crazy as it sounds, we are contemplating installing a delay switch on the ignition to allow the engine to be "turned over" thereby pressurizing of the oil lube system prior to actually starting the motor. While I know I have gone over the edge now, Is there any downside to this adventure? Signed Desperate but still...____ retentive PS, while it doesn't seem like the air pump, how can i check it to be certain.
__________________
dwight |
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
cold start hell | GDJ | Tech Help | 0 | 01-08-2004 07:05 PM |
500E still Racka Racka's on cold start up???? | dwight hinton | Tech Help | 40 | 08-15-2003 05:45 PM |
380SE - High fuel consumption : Diagnosing the Cold Start Valve | amit | Tech Help | 3 | 01-24-2003 06:29 PM |
190e voltage regulator, cold start valve, EHA | Machnumber2 | Tech Help | 1 | 08-29-2002 07:50 PM |
Mercedes 500E : The 4-door Porsche | Jim_Crews | Mercedes-Benz Used Parts For Sale & Wanted | 2 | 01-14-2002 10:49 AM |