|
|
|
|
|
#1
02-21-2002, 05:21 PM
|
|||
|
|||
|
Help pulling wipers on 107 SL
I'm buffaloed here. The wipers on this 380SL are showing
climate damage all the way down to the spindle cap. Due respect for the car impels me to pull them and polish and clearcoat the metal, but what I can't figure out is how they release from the spindle. Any clues for the clueless here? s/b 
|
|
#2
02-21-2002, 06:23 PM
|
||||
|
||||
|
Lift the spindle cap, remove the nut, rock the wiper arm with considerable force. Maybe a dose of penetrating oil (or brake fluid if you're careful) around the threaded spindle shaft to help the cause. That should do it.
BTW, by spindle, I presume you mean the pivot point of the wiper arm. Sixto 91 300SE 81 300SD
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| headlight wipers removed | Sid The Kid | Mercedes-Benz SL Discussion Forum | 3 | 09-04-2010 11:56 PM |
| intermittent wipers nor headlight wipers work | WANT '71 280SEL | Tech Help | 0 | 03-25-2004 08:18 PM |
| adjustable intermittent wipers | 95E320cab | Tech Help | 0 | 11-08-2002 08:43 AM |
| W126 Wiper Motor Runs, Wipers Not Moving | Lance Allison | Tech Help | 1 | 01-31-2002 07:00 PM |
| Intermittent wipers TOO intermittent | Jim H | Tech Help | 2 | 08-24-2000 09:28 PM |
Linear Mode
