|
|
|
|
|
|
#1
|
|||
|
|||
|
In my 1988 300E in the center of the console there is an LCD display that's blank. Is this where the outside temp is supposed to de displayed? Any ideas on correcting/fixing this?
TIA- Stephen Davis 1988 300E - So how hot IS it outside anyways..? |
|
#2
|
|||
|
|||
|
Outside temp LED blank usually is the sensor
locate behind your front plate bracket (is a cable with sensor at one end connector at other end) cable connector is locate inside fuse box. if the LED turn black then you have a faulty display unit. ------------------ MB STARS Master Guild Technician,12 years MB tech 5 years independent shop owner |
|
#3
|
|||
|
|||
|
My problem is different than yours.
The stupid engeneer who placed that thermometer under the front plate was certainly a young 10 years old boy... (the hot that the engine of a 560SEC blows out makes the sensor useless) the sensor indicates the outside temp to 40+ ?! Is there a way to readjust the temp so that when the sensor thinks it's 42 it will be 24? Or should I simply move the sensor to the back if possible...? ------------------------------------- WEB Site : http://www.adamou.dpn.ch A.S.C. 1999 ------------------------------------- [This message has been edited by Adamou (edited 06-07-99).] |
|
#4
|
|||
|
|||
|
How can I change the outside temp display from centigrade to fahrenheit?
|
|
#5
|
|||
|
|||
|
The LED is not black (doesn't seem 'burned out'). How do I check the sensor? Is there a fuse for this or is included with the instrument fuse or is on it's own.
Thanks again- Stephen Davis 1988 300E |
|
#6
|
|||
|
|||
|
Stephen
You can check the fues,under hood at driver side fuse #7 should be 8amps white.(horns,rear defogger,turn sifnal/hazard lamps,warning indicators). Brook The LED can't change from centigrade to fahrenheit. hope this help. ------------------ MB STARS Master Guild Technician,12 years MB tech 5 years independent shop owner [This message has been edited by MB STARS (edited 06-07-99).] |
|
#7
|
|||
|
|||
|
Good info guys.
Any idea on how I can fix this? The fuse is fine and the display seems to be in OK condition. TIA- Stephen Davis 1988 300E 90k/miles |
|
#8
|
|||
|
|||
|
Stephen
Just replace outside temp sensor I have seen a lot fautly sensor. ------------------ MB STARS Master Guild Technician,12 years MB tech 5 years independent shop owner |
|
#9
|
|||
|
|||
|
I'll add it to my list.
Thanks for all of the help. Stephen Davis 1998 300E 90k miles |
![]() |
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Blows Hot Air all the time - display blank | mcollinstn | Tech Help | 8 | 01-07-2005 06:50 PM |
| outside temp on dash display 300 sdl | stangsteve | Diesel Discussion | 4 | 11-24-2003 09:48 AM |
| Outside temp display problem on E500 | TomE500 | Tech Help | 18 | 06-17-2003 03:59 PM |
| newbie and outside temp display | mbdad | Tech Help | 8 | 11-02-2002 03:42 PM |
| Funky outside temp display problem solved. | blackmercedes | Tech Help | 2 | 05-30-2002 05:09 PM |