|
|
|
|
|
#1
09-26-1999, 11:11 AM
|
|||
|
|||
|
Decided to remove the cross yoke on my 74 450SE and replace bushings. What should have been a simple job is now a head scratcher! The eccentric bolt on the passenger side has insufficient clearance to be removed, consequently the yoke is held by the bolt. There is a welded on bracket holding a suspension pivot and the ground for the starter. I tried moving the yoke in all directions but can't find room to remove the bolt. Am I missing something?
------------------ Abe 1970 280SL 1974 450SE 1998 E430 Sport 2000 E55 |
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| For Sale: New prechamber removal tools | gsxr | Diesel Discussion | 24 | 01-28-2013 09:07 PM |
| 190e Pinion Yoke removal | fiero4819 | Tech Help | 2 | 09-12-2004 04:59 PM |
| one stop, 75-0, cross drilled vs. slotted vs. blanks | JHZR2 | Mercedes-Benz Performance Paddock | 9 | 08-01-2004 06:20 PM |
| Why did the chicken cross the road? | Joseph Bauers | Off-Topic Discussion | 7 | 05-28-2004 11:47 AM |
| Cross Pipe removal on M119.974 | roas | Tech Help | 2 | 07-11-2001 02:36 PM |
Threaded Mode
