Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help




Go Back   PeachParts Mercedes ShopForum > Technical Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 03-08-2003, 10:18 AM
Registered User
 
Join Date: Mar 2003
Location: VA
Posts: 58
Fuel pump and Coil terminal w126 560SEL

I have found what appears to be the electrical distribution block, but it looks nothing like the one in the service manual.

here is what I have:

the block, seperated into three portions. Connected to the top terminal section from the left side is a blue wire which goes to the block and seperates into a blue wire and green/red wire which come out onto the right side. These wires are joined at the block with a Phillips head screw.

Next section down, from the left I have two red cables joined to the block with a bolt and comes out the opposite side to a single red cable. the third section is joined phsically by a metal plate, and has a red cable coming off of it on the right side.

Below the block, i have connected to the fire wall a black cable that goes into a black 'bullet' appox. 2" by 3/4" tapered 1/2" at ingress and egress points. The egress point has a single black cable coming out.

Below this 'bullet' I have what I believe is probably the #16 connector. It has two wires going in and out of it. when you pull the cable connector apart it appears that the connector is silver plated copper. I cannot determine the color of the wires going in other than that one is light and the other is dark.

Let me know how off base I am.

Respects,

Andy
Reply With Quote
  #2  
Old 03-08-2003, 06:19 PM
Registered User
 
Join Date: Mar 2003
Location: VA
Posts: 58
Picture to go along with plea for help...

Please look at this photo and let me know if anyone can identify C as the fuel and coil relay plug. I've searched the archives, found nothing and the picture in my book does not look like this.

Last edited by Please Help; 03-10-2003 at 07:42 PM.
Reply With Quote
  #3  
Old 03-10-2003, 07:44 PM
Registered User
 
Join Date: Mar 2003
Location: VA
Posts: 58
Anyone recognize the picture???

Thanks!
Reply With Quote
  #4  
Old 03-10-2003, 09:10 PM
Newbie Benz Driver
 
Join Date: Dec 2002
Location: Between Oakland and Vallejo, CA
Posts: 253
I believe that's the positive battery cable connection to the alternator and the fuse block for connection A, i dunno about the rest, but C appears to be for the coolant surge tank or oil level sensor. The coil terminal is by the ABS module, next to the EZL module on the fender, and the fuel pump relay is by the brake booster, it says Kickd. on it.
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 12:58 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2011 Pelican Parts - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page