Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help

Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

LinkBack Thread Tools Display Modes
Old 09-18-2000, 11:47 AM
Registered User
Join Date: Oct 1999
Location: Richardson, Tx
Posts: 25
I posted a question to all asking about removing a broken key out of an ignition for a 94 c280.
The task was completed soon after I had my hands on the replacement tumbler and steering lock mechanism.
After a short examination of the parts, I was able to determine the course of action needed to remove the old tumbler.
Actually, I will be able to return the steering lock mechanism since I did not damage the old one in the process of removing the tumbler.
I did not have any help on this except for a "cut it off" suggestion from my mechanic and a response post.
That said, if anyone tells you to send this job to a dealership think twice; instead of spending $600 (quote from the Mercedes dealership) I did it myself for $42.50 (cost of the tumbler).
I think I will add Master Drill Technition and Certified Dremel Advisor to my signature.

85 16v
87 16v
94 C280

Reply With Quote
Old 09-19-2000, 12:00 AM
Stan Rodbell
Posts: n/a
So how did you do it?
Reply With Quote
Old 09-19-2000, 01:51 AM
unkl300d's Avatar
Registered User
Join Date: Jul 1999
Location: San Francisco, Ca
Posts: 2,469

ditto !!
its nice to toot your own horn
but how about contributing
some info ?

Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Engine runs after turning ignition off Dweezl Diesel Discussion 12 08-20-2004 07:38 AM
Hard Starting Sonny Aranas Tech Help 0 06-21-2003 12:39 AM
Cant start engine with ignition switch 83 240D Carrameow Tech Help 9 06-01-2003 10:09 PM
HELP! - Ignition Problems On A 123 Tod Labrie Tech Help 0 05-19-2003 08:47 AM
Ignition Key Sasfied Tech Help 1 11-21-2000 05:27 PM

All times are GMT -4. The time now is 02:29 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page