Front Passenger Window Switch Pinouts---What Does What? ('81 300D W123) - PeachParts Mercedes-Benz Forum

ROLLGUY · #1 07-24-2017, 12:50 PM

If I'm not mistaken, you can plug the rear switch into the front connector and it should make the window go up and down if that switch worked on the rear.

iladelf · #2 07-24-2017, 06:07 PM

Quote:

Originally Posted by ROLLGUY

If I'm not mistaken, you can plug the rear switch into the front connector and it should make the window go up and down if that switch worked on the rear.

Of course, the back switch is not functioning on the passenger side. Suppose I could grab the driver's side back door switch and give it a whirl...after all, a switch is a switch, as long as the pins are the same.

ROLLGUY · #3 07-24-2017, 08:28 PM

Quote:

Originally Posted by iladelf

Of course, the back switch is not functioning on the passenger side. Suppose I could grab the driver's side back door switch and give it a whirl...after all, a switch is a switch, as long as the pins are the same.

I am talking about the switches on the center console. Both plugs are the same, so either the front or rear half of the double switch will plug into either connector. I doubt the switches on the rear doors will work. I have not tried, so I don't know for sure.