|
|
|
|
|
|||||||
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
07-30-2019, 10:15 PM
|
||||
|
||||
|
'09 R320 Bluetec- no tail/brake loghts after installing repair harness
I installed the two repair harnesses (164-826-00-07) on an '09 R320 Bluetec, and there is still the tail/brake light warning on the instrument cluster. I checked for power on the wire, and there is none. I also used my Icarsoft MB II and monitored the live data. It says there is an open or short in the wiring for both bulbs. When stepping on the brake, the monitor shows both lights being off. I am not sure what to do now. Anyone have experience with this issue? It happens on the ML and others as well. Thanks, Rich
__________________
 All Diesel Fleet 1985 R107 300SLD TURBODIESEL 2005 E320 CDI (daily) LOTS of parts for sale! EGR block kit http://www.peachparts.com/shopforum/diesel-discussion/355250-sale-egr-delete-block-off-plate-kit.html 1985 CA emissions 617 owners- You Need This! Sanden style A/C Compressor Mounting Kit for your 616/ 617 For Sale + Install Inst. Sanden Instalation Guide (post 11): http://www.peachparts.com/shopforum/diesel-discussion/367883-sanden-retrofit-installation-guide.html 
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode
