Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

 
 
LinkBack Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #11  
Old 12-25-2001, 12:15 AM
David C Klasse's Avatar
CheFrac is Back!
 
Join Date: Jan 2001
Location: Mission Hills in the City of San Diego
Posts: 2,355
Well I went by the dealer today to have them plug into the STAR DIAGNOSIS machine. Well I got lucky... I asked my service advisor (young, real nice guy) if he could just hook it up real quick and pull the codes. Well they rolled the machine out, and plugged it into the CAN/BUS under the hood (I did not know that the OBDII info could be retrieved via this port! I learned that the OBDII connector under the hood was simply the 'generic connector' to meet the basic laws of OBD).

Well, I was hoping to get some sort of pattern, but didn't get anything that really helped....

Got codes:
P0300
P0302
P0303

So I'm assuming that these are cylinder 0 (?), 2, 3 misfires. Anyways, I decided to go in and buy the coil ends, as suggested. So I purchased 3 coil cable plug ends ($11.76 x 3), and I bought 6 spark plugs ($2.69 a peice). My spark plugs were changed about 35k miles ago (my service advisor told me that they're supposed to be replaced @ 15k intervals.... I thought I remember the intervals being 30k... I'll have to double check.) Well I was past due, in any event.
While there, I also bought a new wiper blade because the BOSCH blades sold at auto part stores do not fit properly (even though they are the right length and suppsoed to fit my C280). Well that blade mechanism was $36.40! Jeeez! I also bought some of the MB Grease (he gave me bearing grease?)... I'm going to lube my wiper mechanism.

I am going to have my independent mechanic replace the coil ends and spark plugs on Wednesday. This is a pretty basic service, correct? Just spark plug replacement and a few added minutes to replace the coil ends... correct?

(I really hope that this is the end to my LONG and PROGRESSIVE ACCELERATION RESISTANCE!

Thanks guys.
__________________
2006 E350 w/ 155k miles (Daily Driver)

Previous:
1993 300E 3.2L Sedan w/ close to about 300k miles
2003 E500 Brilliant Silver (Had 217k miles when totalled!)
1989 300E with 289,000 miles (had for <1 yr while in HI)
03 CLK 500 cabrio (Mom's)
2006 C230k (Dad's)
1999 S420 (Mom's/Dad's)
2000 C230k Sport sedans
2001 CLK320 Cabrio (Mom's)
1995 C280 My First Mercedes-Benz... (155k miles. EXCEPTIONAL AUTOMOBILE. Was Very hard to let go of!)
Reply With Quote
 

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Hard Start and running rough when warm... '86 300E mwaller Tech Help 6 01-20-2005 11:43 AM
engine running rough and stalls when hot at idle tmaheras Mercedes-Benz SL Discussion Forum 1 05-21-2004 11:50 AM
Rough Running 280C - Help! americanrm Tech Help 0 08-23-2002 10:49 PM
C280 Runs Rough americanrm Tech Help 0 08-23-2002 09:35 PM
450SL running rough Jim Martin Tech Help 1 03-01-2000 10:03 PM



All times are GMT -4. The time now is 10:52 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page